Skip to Content
You are currently viewing the page for: Flag United States Change

Follow the steps below to install Garbaruk RD cage on SRAM 11/12-speed rear mech

TOOLS YOU WILL NEED


In order to install Garbaruk RD cage seamlessly, you will need the following tools:

  • 3mm Allen key
  • 2mm Allen key

STEP 1: Fix the cage in place using the cage lock




STEP 2: Undo the cage set bolt




STEP 3: Unmount the derailleur cage


Disable the cage lock and decompress the clutch spring by rotating the cage counter-clockwise.


Unscrew the derailleur cage bolt. After that the cage can be removed.


STEP 4: Remove derailleur pulleys




STEP 5: Prepare Garbaruk RD cage for installation


Unscrew the cage bolts as shown on the picture below.



Install the derailleur pulleys.



Tighten the derailleur pulleys and cage bolts.


STEP 6: Install Garbaruk RD cage





Turn the cage clockwise by 1 turn and enable the cage lock.



Tighten the cage set bolt (lower picture is applicable for 12-speed derailleurs, upper one for 11-speed derailleurs)


Select a Country

Current Location: United States

Suggested: United States